Mac OS X 10.6 Snow Leopard Build 10A432 Golden Master Multi-Language

Burning disc images in OS X is a rather easy task.

For example if you wanted to burn “Mac OS X 10.6 Snow Leopard Build 10A432 Golden Master Multi-Language” you would do the following:

1. Double click on the ISO/DMG
2. Open Applications -> Utilities -> Disk Utility
3. Highlight the Snow Leopard Install ISO
4. Click Burn

Yes, that is all there is to it, although on some older Mac hardware disc DL disc burning can fail. The same holds true if you wish to burn Nintendo Wii ISOs or various other sorts of ISOs you might acquire.

Snow Leopard Installation Instructions

IMPORTANT: Always back-up your system (Time Machine, Mozy, etc) before installing pre-release software seeds/builds.

Method A. Install Snow Leopard using hard disk partitions:
Requirements:
Three hard disk partitions internal or external (you could use 2 but 3 recommended)

Hard disk partitions setup:
Partition 1 – download Snow Leopard disk image (google search: Snow Leopard 10A432)
Partition 2 – restore disk image onto this partition
Partition 3 – partition to install Snow Leopard on
(Partition 3 is optional, you can install onto Partition 1 if you only have 2 partitions)

Procedure:
1. Boot off partition 1, using Disk Utility, restore the Snow Leopard DVD Disk Image onto partition 2

2. Boot off partition 2 and install Snow Leopard onto partition 3
OR if you only have 2 partitions:
2. Boot off partition 2 and install Snow Leopard onto partition 1

Note: Use System Preferences : Startup Disk to pick startup volume

OR

Method B. Burn bootable DVD for installation:
Requirements:
1. A DVD drive capable of burning double-layer DVDs
Here’s how to check to see if you have such a drive:
– Launch “Systems Profiler”
– Under Hardware, click on “Disc Burning”
– Under “DVD-Write”, if “+R DL” is listed then your machine has the ability to burn double layer DVD discs.
2. A blank DVD+R DL media

Procedure:
1. Launch Disk Utility
2. Click the Burn button in the Toolbar
3. Navigate to and select the downloaded DVD disk image then click the Open button
4. Insert a blank DVD+R DL disc into your DVD burner
5. Click the Burn button

After burning, install Snow Leopard from the burned DVD.


One Response to “Mac OS X 10.6 Snow Leopard Build 10A432 Golden Master Multi-Language”
  1. hue 29 August 2016 at 8:35 pm #

    download mac os x 10,6 (final Retail) for free

Leave a Reply